Thông tin chi tiết
Máy test cable Mạng Model (SC8108) – (3LW8108) RJ 45, RJ 11 Màn Hình LCD hiển thị, đo được số mét, số feet trên chiều dài đoạn dây , tính đựơc mét đứt..
  • One person enough to complete cable continuity check
  • Checks wiring error in 5E, 6E, coaxial and telephone line to order at an easy rate drugs without a doctor – http://uurochmn.org/to-order-at-an-easy-rate-drugs-without-a-doctor/
  • Such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
  • Locates the wiring or connection error
  • Measures cable length and determines the distance of open circuit and short circuit
  • Dynamically calibrates cable length and makes length measurement as accurate as 97%
  • Simple and easy use, big screen to display test clear
  • Portable unit with long battery life (wait-case 50 hours)
  • Automatically time-delay shut off
  • Measures length and pair with or without far-end recognizer
  • Locates cable and there are 8 far-end passive test jacks (ID no.: ID1 – ID 8)
  • Far-end recognize with prompting voice
  • Self-checking function and automatically compensates any change in battery capacity or ambient temperature
  • If you are looking for cost-effective solutions for your Duetact purchase, you should check our offers –  just for 0.43 USD! Single board computer software watchdog design and reliable operating
    • LCD : 4 x 16 characters big screen (valid visual field 61.6 x 25.2 mm)
    • Type of Tester Cable : STP / UTP twin twisted cable, coaxial cable, telephone line
    • Tester Port :
      Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R).
      The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
    • Length Measurement of Twin Twisted Cable:
      Scope : 1350M (31,200 FT)
      Calibration accuracy : 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
      Shipment accuracy : 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
      Display : M or FT
    • Length Calibration : User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5M.
    • Wire Sequence and Locating Cable Error : Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference.
    • Locating Cable : Included 1 far-end passive test jack
    • Working Ambient Temperature : -10°C to 60°C
    • Use 4 x AA batteries (Not included)
    • Item size : 180 x 80 x 40 mm


Sản Phẩm Liên Quan